UNITEST TELARIS Earth  Earth Resistance Tester
UNITEST TELARIS Earth Earth Resistance Tester

Key Functions

  • Earth resistance measurement
  • Specific earth resistance measurement

General Information

  • The integrated constant current  measurement principle allows the application in sandy as well in rocky environments
  • Monitoring and display of auxiliary earth and probe resistances
  • Displays of the actual test current
  • Automatic and manual and frequency selection for noise reduction
  • Test voltage preselection
  • Clear and large LCD providing the user with an optimum visual indication of both test values and limits
  • Auto power off

Special Features

  • Earth resistance measurements 2/3 and 4-pole
  • Specific earth resistance measurements in compliance with the Wenner principle
    UNITEST Cable Length Meter 2002
    UNITEST Cable Length Meter 2002

    Key Function

    Cable Length measurement by four pole method (Kelvin method), access is needed to beginning and end of cable

    General Information

    • 12 selectable cross sections
    • Further cross sections via conversion or reference cable
    •  Line length up to 20km

    Special Features

    Can be used for single-wire cables

    4 IN 1 MULTI-FUNCTION ENVIRONMENT METER
    4 IN 1 MULTI-FUNCTION ENVIRONMENT METER

    Measure:

    • Sound Levels
    • Light Levels
    • Humidity (%RH)
    • Temperature
    Phase Rotation Testers
    Phase Rotation Testers

    Voltage range: 120 to 440V

    Current consumption (at voltage): <3.5mA (440V)

    Frequency range: 50 to 60Hz

    Power supply: derived from unit under test

    The Most Comprehensive Portable PQA on the Market
    The Most Comprehensive Portable PQA on the Market

    “Catch Power Quality Problems on the Fly…”

    Monitor for:

    • Inrush Current
    • Voltage Swells
    • Voltage Dips
    • Transient Overvoltage
    • Interruptions

    Measure and Record:

    • Power and Power Factor
    • Active/Reactive Energy
    • Demand
    • Load Changes(with graph display)
    • Voltage and Current
    Photo/non-contact Tachometer
    Photo/non-contact Tachometer
    • Infrared LED < 600mm from target
    • Range 0.5 - 100,000 RPM   - Accuracy 0.05%
    • Speed wheel for m/sec and ft/sec
    Insulation Resistance Testers
    Insulation Resistance Testers
    • Digital display of IR for HP devices (transformers,
    • cables, electrical machines etc.)
    • Built-in High Power Voltage Generator
    • (500 / 1000 / 2500 / 5000V)
    • Rechargeable battery power supply
    Fluke 376 Clamp Meter
    Fluke 376 Clamp Meter Max Current 2.5kA ac, 999.9A dc CAT III 1000 V,CAT IV 600 V

    Product Details
    Fluke 376 True RMS AC/DC Clampmeter with iFlex. The Fluke 376 clampmeter offers improved performance for a wide range of current measurement situations. 

    With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.The new 18 in (458 mm) iFlex flexible current probe is included. It expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure around awkward-sized conductors and improved wire access. The Fluke 376 is the direct replacement for the Fluke 337 clampmeter.

    Features & Benefits

    1. Large backlit display
    2. 1000 A ac and dc current measurement with fixed jaws
    3. 2500 A ac current measurement with iFlex flexible current probe
    4. 1000 V ac (True RMS) and dc voltage measurement
    5. 500 mV dc measurement range to interface with other accessories
    6. Frequency, capacitance, resistance and continuity measurement
    7. Display HOLD, Min, max, average and inrush recording
    8. Low pass filter for stable readings in noisy environments
    9. CAT IV 600 V, CAT III 1000 V safety rating